|
| AMETEK LEVEL MATE II |
|
…All in One Package.
Description: The AMETEK LEVEL MATE II Level System uses a stainless steel transmitter. A series of perforations in the bottom of the unit protects the sensing port from either clogging or damage.
The customized LEVEL MATE II meter displays data from the transmitter, provides excitation voltage and transmits an analog signal for remote recording, alarm or control functions. It is easy to calibrate by front panel adjustments. Its dual-programmable setpoints permit high-high, low-low, or high-low control with adjustable hysteresis. The large, easy-to-read LED display gives local indication while the optional isolated analog output can interface with ancillary display, recording or control devices.
Ranges: Feet of Water: 0 to 14, 0 to 35, 0 to 69, 0 to 138, 0 to
230, 0 to 345, 0 to
460, 0 to 690
Meters of Water: 0 to 4, 0 to 10, 0 to 21, 0 to 42, 0 to
70, 0 to 105, 0 to
140, 0 to 210
Transmitter Output: 4 to 20mADC, limited to 30 mADC
Transmitter Power Supply: 24 VDC from meter
Transmitter Electrical Connection:
Attached #20 AWG polypropylene insulated and shielded
conductors in a black
polyurethane jacket. Unspliced
lengths to 3000 ft. (1622 m)
Transmitter Construction:
Diaphragm: Type 316L stainless steel
Housing-Type: 316 stainless steel
Nut/Washer-Type: 316 stainless steel
Cable Grommet: Viton
Meter Display: 4 digit, 0.56 inch
high (13 mm), LED display.
Meter Input Voltage: 90 to 264 VAC @
47 to 70 Hz
